Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotator Choice for Larger Yagi

To: K7LXC@aol.com, towertalk@contesting.com, jerryw6uv@gmail.com
Subject: Re: [TowerTalk] Rotator Choice for Larger Yagi
From: Mike via TowerTalk <towertalk@contesting.com>
Reply-to: Mike <w2gr@aol.com>
Date: Sun, 08 May 2016 13:56:04 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
    
Following the previous thread of rotators for large arrays...
I have for sale and will be taking to Dayton..a rotator you can't brake even if 
you wanted to...
Telrex model #A2675RIS complete.
Also taking a King conversions SB-220 6 Meter amp...and have for sale my ALPHA 
8410..
I bought the spare Telrex for my Sky Needle but rebuilt mine last year ...after 
45 years in the air...put new bearings and seals in and will be dead and worm 
food before it's needs touched again..
Any interest please contact me...the Telrex Wil be the last rotator you'll ever 
need.
73
Mike W2GR 


Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: K7LXC--- via TowerTalk <towertalk@contesting.com> 
Date: 05/04/2016  3:37 PM  (GMT-05:00) 
To: towertalk@contesting.com, jerryw6uv@gmail.com 
Subject: Re: [TowerTalk] Rotator Choice for Larger Yagi 

>  Is there a better way to determine if a rotator can handle  an antenna 
based
on its size rather than just its wind area? Lots of people  here have
recommended the M2 Orion 2800, which on paper is rated for 35 sqft,  but
when I asked the tower installer who will be putting the antenna up  whether
he thought the Orion could handle the OB17-4, he said that antenna  will
tear an Orion up and strip the gears on the output shaft in short  order.
 
Hiya, Jerry --
 
    I also recommend the Orion IF 1) you use a  different controller 
(preferably the Green Heron - the factory controller is  something only the 
designer could love) and 2) use a different mast clamp  (the factory one has a 
couple of fatal problems),
 
    I've installed dozens of Orions and have  never seen one with gears 
stripped. It uses a worm gear drive so it's kind of  far fetched that the gears 
would be stripped. I do question your installer  though but everyone is 
entitled to their own opinion. 
 
    Rotator ratings are not an exact science. Different  antennas have 
different wind profiles and characteristics. The rotator chapter  in my UP THE 
TOWER book has a table of the static specifications and IMO using  the 
Hy-Gain Effective Moment or the Yaesu K Factor are both reasonable  
estimations. 
You'll never get the exact answer you're looking for. My advice? Go  with 
what you've got and it'll work FB.
 
Cheers &GL,
Steve    K7LXC
TOWER TECH 
 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>