Hi Kelly,
With the F connector it is easier to pull the cable through the conduit, if
I need to. But that is about it.
N2TK, Tony
-----Original Message-----
From: ve4xt@mymts.net [mailto:ve4xt@mymts.net]
Sent: Sunday, October 02, 2016 1:17 PM
To: N2TK, Tony <tony.kaz@verizon.net>
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] F to UHF adapters
Hi Tony,
I'd suggest you're best off going with Plan B.
While I'm not a connector conspiracy theorist saying every adapter is evil,
if you don't need an adapter, what's the upside of using one?
73, kelly, ve4xt
Sent from my iPad
> On Oct 2, 2016, at 11:56 AM, N2TK, Tony <tony.kaz@verizon.net> wrote:
>
> I use RG6 with male F connectors on my receive antennas and 80M 4-sq.
> At the Comtek box and receive antenna box, both are covered but
> outside, I use F-female to UHF-male adapters. Even though they are
> covered from the elements they corrode and fail. Could not find an
> Amphenol adapter in their catalog.
>
>
>
> Does anyone know if there is a good quality adapter out there? If no
> luck finding a good adapter I can always crimp on PL-259's.
>
>
>
> Tnx
>
> N2TK, Tony
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|