I stand corrected - I just found an EZ Trench Cable Installer that is
available - at Home Depot! Only one store has it - but hey - that is great.
Gary
http://www6.homedepot.com/tool-truck-rental/Cable_Installer/TP400CL3/index.html
-----Original Message-----
From: Hardy Landskov
Sent: Tuesday, March 7, 2017 9:25 AM
To: 'StellarCAT' ; w5prchuck@gmail.com ; 'Herb Krumich via TowerTalk'
Subject: RE: [TowerTalk] radials 160
Sunbelt Rentals in Orlando, FL rents an EZTrench that digs the hole, lays
the coax and then covers it back up. I don't know what it costs. My problem
is trying to get it here since it's 70 miles away.
Hardy N7RT
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
StellarCAT
Sent: Tuesday, March 07, 2017 9:07 AM
To: w5prchuck@gmail.com; Herb Krumich via TowerTalk
Subject: Re: [TowerTalk] radials 160
if you do find something please let us all know - I'm not aware of anything
that is available to rent for this purpose.
Gary
K9RX
-----Original Message-----
From: w5prchuck@gmail.com
Sent: Tuesday, March 7, 2017 8:35 AM
To: Herb Krumich via TowerTalk
Subject: Re: [TowerTalk] radials 160
There is a machine similar to an edger that electricians use to cut the
trench and insert the wire all in one pass. I think you can rent them.
Maybe even at Home Depot. Might be worth buying one…
Chuck W5PR
Sent from Mail for Windows 10
From: Herb Krumich via TowerTalk
Sent: Monday, March 6, 2017 5:33 PM
To: towertalk@contesting.com
Subject: [TowerTalk] radials 160
All winter I have been clearing out a large area to put radials down for a
160 meter antennaI built an antenna which looks like a T between two 90 foot
towersThe vertical leg is 65 feet and the horizontal is the same.
I used it with only a few radials and was pleased with contacts to the west
coast from Pa.So here is my questionWhat type of tool can I use to bury the
radials an inch or so.My problem is there are quite a few surface rocks that
I will have to deal with.Does Home Depot or Lowe's have something ?I was
even just thinking about using a pic and draging it backwards Preferable no
motors due to the rocksThanksHerb K2LNS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|