The walk behind one may be a little too small for 1400 feet worth. I would
rent one of these instead:
https://www.atoolshed.com/equipment.asp?action=category&category=38&key=9117
-Mike
On Wed, Nov 1, 2017 at 3:32 PM, Paul Booth <wa6ibu@earthlink.net> wrote:
> Jeff, if you actually want 12" wide you might have to go with a backhoe.
> But the one I own and use is made by Ground Hog and it will do 12-18" deep,
> about 6" wide; which I use for pipe and cable.
>
> https://www.homedepot.com/p/Ground-Hog-18-in-5-5-HP-160cc-Ga
> s-Walk-Behind-Trencher-T-4-HS18/206863961
>
> Paul, W6IBU
>
> -----Original Message----- From: Jeff
> Sent: Wednesday, November 1, 2017 2:25 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] trencher
>
>
> I want to cut a slot in the yard about 12” wide and about 12” deep to
> accommodate tower wiring here on the site. In total the runs are about
> 1400 foot.
>
> Is a trencher the right tool for that job?
>
> I have no experience with that sort of thing but the rental guy I talked
> too scratched his head when I mentioned the 1400’ length and the fact the
> trench was shallow. Maybe I have the wrong rental place. Or maybe this is
> better a job for a mini excavator?
>
> 73/jeff/ac0c
> www.ac0c.com
> alpha-charlie-zero-charlie
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
Mike Lyon
mike.lyon@gmail.com
http://www.linkedin.com/in/mlyon
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|