Tim,
This is the first time I heard of a PollyRod Failure in mid span ! I
know of one but it was struck by a tree mid span.
WOW I had my tower guyed with it and installed it on a number of other
towers. A 6 year life span .
I bought mine with a group purchased with Tyler K3MM being point man .
And John, Yes there was a problem with the Rolls splitting 180 degrees .
Roll lengths varied I seem to remember 300 ft ??? There was a great amount
of energy in a coiled role. A ham at Franks W3LPL was injured ( not sure to
what degree) unrolling a coil. There was a number of theories on why .... but
PollyRod stepped up and replaced the damaged rolls...
One thing I know for sure the 3/8 rod makes great none conductive tomato
stakes. ( I had one broken roll)
Wayne
________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of john@kk9a.com
<john@kk9a.com>
Sent: Tuesday, March 6, 2018 2:27 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] pultruded/polygon rod
This is the first time that I have heard of an installed Polygon Rod
failure. I recall reading something about it fracturing on the reel,
perhaps when stored for a long time. I was also unaware of the short UV
life. Great information Tim. I believe that there is a 5000 foot minimum
order so unless WD8NPL has a lot of towers or many friends needing this
material it is still a pretty expensive option. I use Phillystran and I
have seen no deterioration after decades of use.
John KK9A
Subject:Re: [TowerTalk] pultruded/polygon rod
From: "Tim Duffy"
Hello Steve
At one time I used polygon rod on all my towers. After having a polygon rod
break (mid span) I have started the conversion process to Phillystran for
all of my tower guys.
Even under the best of circumstances Polygon rod must be replaced every 6 to
8 years due to the fragmenting of the fiberglass (the UV model).
73
Tim K3LR
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Steve
Baughn
Sent: Tuesday, March 06, 2018 1:08 PM
To: towertalk@contesting.com
Subject: [TowerTalk] pultruded/polygon rod
Wanted to pick some of the experts' brains on the use of fiberglass rod for
guys such as strength and durability/lifespan. I am considering using this
for a tower project. Was originally looking at phillystran but for the heavy
duty stuff it is price prohibitive here. Any thoughts, suggestions, etc on
what to look for or ask about appreciated.
73, Steve, WD8NPL
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|