Herb,
Sounds like you are looking for some "bent pin shackles" such as those sold
by DX Engineering: https://www.dxengineering.com/parts/dxe-bps-j732
A friend gave me a bunch of these years ago and I've used them on several of
my towers. They make for a nice and neat connection between the guy
insulator and tower.
DXE also sells a kit which includes the shackles and insulators.
73/Jon
Jon P. Zaimes, AA1K
Tower climber for hire
http://www.aa1k.us/
Cell: 302-632-2353
Reviews of AA1K tower work on eham website:
http://www.eham.net/reviews/detail/12922
Hug your favorite tower every day, and always stay connected to it.
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
Herbert Schoenbohm
Sent: Friday, March 16, 2018 8:40 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Tower Connector for large egg insulators
I am looking for a good way to make a connection from egg insulators (power
company type) to my tower so I can insulate the guy wires. I have only a
few and they are bell-shaped retainer with two eye holes where a specially
bent bolt goes through and the top part of the bell-shaped retainer connects
to the tower and the guy wire or Chinese finger holds the steel guy in place
without touching the bell-shaped retainer. Does anyone know where these can
be obtained?
Please let me know.
Herb Schoenbohm, KV4FZ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|