HI Floyd
That is what the one I designed this one after looked like. I was just
wondering if the cut off wire made any difference in the operation of the
antenna. Thanks and 73
Tom W7WHY
On Mon, Jul 30, 2018 at 2:33 PM Floyd Rodgers <kc5qbc@swbell.net> wrote:
> On the one i just looked at there is about a 1/4" cutout (air gap) on the
> short leg which is covered by heat shrink.
>
>
> On Monday, July 30, 2018 3:59 PM, Tom Osborne <w7why1@gmail.com> wrote:
>
>
> Howdy all.
>
> I am building a 2 meter J-pole out of TV twinlead for portable use.
>
> When cutting the short side of the lead-in wire, is it better to leave the
> piece after the cut in the insulation, take it out, or no difference.
> Thanks and 73
> Tom W7WHY
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|