I wanted to look at your installation before responding however your WA2FGK
- com website appears to be sketchy. You did not say how long your aluminum
mast is but I probably would not tram against it as they bend very easily. I
rarely use a tram unless there are large antenna just below the antenna I am
working on and I cannot go straight down. If I need a tram I try to connect
the cable to the tower and not the mast, in my case the towers are strong
enough not to need a back guy.
GL,
John KK9A
From: Herb Krumich wa2fgk
Date: Thu, 23 Aug 2018 19:03:20 +0000 (UTC)
I have a 4 el 20 meter HyGain yagi, that I am going to tram to a 60 foot
Rohn
25.I bought 3/16 inch stranded stainless and will attach it to my garden
tractorI have a 2 inch diameter 1/4" wall aluminum mast on the towerNow my
question.The tower is guyed in two locations.Being the antenna only weighs
50
lbs, how important is it to back guy the mast ????Hope I explained this
properly
ThanksHerb K2LNSFrankford Radio ClubGetting ready for another contest season
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|