Date: Thu, 27 Dec 2018 13:37:28 +0000
From: Wayne Kline <w3ea@hotmail.com>
To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] Force 12 antenna part
<I am in the prossess of rebuilding a F-12 2X40 and 2 30 on the same 24 Ft.
boom
<The original owner never took the precausions to use a never seize on the
aluminum standoff resulting in snapped off SS 1/4 in SS bolts. Is there a
source for these standoffs ?
<73? Wayne W3EA
### I have seen the same identical 6 x sided aluminum stand offs , with
1/4-20 threads in both ends..at local big box stores. The F12 version..on
SOME of his versions,
also had a aluminum piece welded to the outboard end. Some mode;s did not
have the welded end..and just had a hole in the side for the alumo weld wire to
slide into.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|