I have had great success with Universal towers ... the sections are
10' in length (most Heights tower sections are 8'), and, using the
proper taper schedule, a 60 to 80 foot tower with great wind load
ability is not difficult.
Presently, I have 3 up ... a fourth goes up this year .. and plans
include three more.
Don't think cheap ... they aren't .. but, are all SELF-SUPPORTING, and
no guy-wires are needed. ... nor recommended.
73
Don
N8DE
Quoting Raymond Benny <[email protected]>:
Check out Universal, and Heights towers.
Both make aluminum towers but generally you have to follow their tower
section tapers to get very high.
Ray,
N6VR
On Sat, Feb 9, 2019, 9:33 AM Kevin Adam <[email protected] wrote:
Is there tower mfg aluminum tower like makes like Rohn 25 design I'm
looking to install a tower aluminum 40 to 60 footer
N9IWW
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|