Towertalk
[Top] [All Lists]

Re: [TowerTalk] Source for aluminum tubing?

To: "towertalk@contesting.com" <towertalk@contesting.com>, n9en@live.com
Subject: Re: [TowerTalk] Source for aluminum tubing?
From: Grant Saviers <grants2@pacbell.net>
Date: Sun, 17 Mar 2019 08:29:35 -0700
List-post: <mailto:towertalk@contesting.com>
onlinemetals.com stocks 0.4375" OD of 6061 T6 in .065 wall. Also 0.035 wall but that sounds like a bad choice if 0.049 is failing. Cut to length and UPS shipping.

They are a division of ThyssenKrupp so if you need full length production quantities, no problem.

Over time they have increased the selection to include some 0.058 wall 6061 needed to make telescoping joints. One warehouse is local for me so that is very convenient for picking up full or long lengths or heavy stock of any material.

Grant KZ1W

On 3/17/2019 7:50 AM, Wayne Kline wrote:
Brad,



I  echo John’s  statements.. I have always used  replacement 7/16 odd dia 
tubeing from Hy-Gain  now MFJ

And ALWAYS use polly proplean as anti dampening  for survibility.



Wayne W3EA



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of john@kk9a.com 
<john@kk9a.com>
Sent: Sunday, March 17, 2019 9:08:52 AM
To: towertalk@contesting.com
Cc: n9en@live.com
Subject: Re: [TowerTalk] Source for aluminum tubing?

Brad that is a tough size to find. I used to buy Ø7/16 with a 0.049 wall from a ham 
in Ohio that sold 6061 tubing however he retired. I had a bunch of extra heavy duty tips 
in Aruba that I gave away when I sold my station. I have found Ø7/16 online though 
commercial sources but it was pricy for low quantities. You need to purchase drawn tubing 
for a proper fit. Perhaps DX Engineering should pick up this size. Hy-gain tips break 
easily, at least they have for me and I only used them for temporary contest antennas. 
Probably the least expensive and easiest place to buy a tip is though Hy-Gain.

John KK9A


Brad Anbro N9EN wrote:

​Hello all,

I am rebuilding an old HyGain 153BA 3-element 15 meter monoband yagi and I
was wondering if there is a good source for the 7/16" diameter by approximately
.039" wall thickness aluminum tubing that is used for the ends of the element
half-sections?

Years ago, Texas Towers used to stock a wide variety of aluminum tubing but
on their web site I see only two sizes listed.

Thanks for any help with this!

73 de Brad Anbro, N9EN
Bluff City, Tennessee

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>