Towertalk
[Top] [All Lists]

Re: [TowerTalk] Homemade portable mast

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Homemade portable mast
From: Grant Saviers <grants2@pacbell.net>
Date: Fri, 30 Aug 2019 07:26:40 -0700
List-post: <mailto:towertalk@contesting.com>
For a coming trip, I just purchased a 6'6" surfboard bag for Spiderbeam fiberglass poles. There are a wide ranging lengths and styles available and one exactly fit the carrier max dimension for length on domestic flights, longer was ok internationally. So it a good idea to check all of the hops for limits.

Surfboards are ok in the South Pacific and the max allowed weight for us is 32Kg. ;)

Grant KZ1W

On 8/29/2019 9:28 PM, jimlux wrote:
On 8/29/19 6:31 PM, john@kk9a.com wrote:
For years I brought a homebrew mast to the Carribean to support a 3el HF beam. Mine was about 25' high and a constant diameter with couplers. Each piece was 4' long around the 2 /2 diameter that you suggested. Yes it was heavy but it worked well and back then luggage was mostly free. Since your 6 foot pieces exceed the largest allowable luggage size I wonder how the airlines will handle this now and what the cost would be? I know that heavy luggage has become very expensive. A golf bag used to be acceptable free luggage and it was easy to walk past customs but I haven't done that in a long time. Another option is just purchase pipe in Tanzania.


ski bags..

That's what the EME dxpeditioners did for their yagi booms.
(and yes, there is skiing.. Granted Kilimanjaro is in Kenya, but there's plenty of snow topped mountains that aren't quite as high)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>