Hi Bill,
I don't think you will have any problems with that. I would think that the
cable companies (or whoever ordered it in the first place) ordered anything
that would go bad in a short (<20 years) time.
You said there were no signs of oxidation a few inches from the ends and the
attenuation is well as expected. That's a good sign.
I'm using very old cable TV cables up my tower and that works well for both HF,
VHF, and TV (don't tell anyone).
I would think that the problems we had with coax cables from the war are taken
care of by now. The dielectric in my TV cable was white with no discoloration
unlike old coax from the war era that became yellow after some years and, by
then, lost some good characteristics like low loss.
Just my penny. 73 de,
Hans - N2JFS
-----Original Message-----
From: Ralston, William <William.Ralston@viasat.com>
To: towertalk@contesting.com <towertalk@contesting.com>; W4EF@dellroy.com
<W4EF@dellroy.com>
Sent: Wed, Nov 13, 2019 4:48 pm
Subject: Re: [TowerTalk] Old Hardline
Mike -
I bought a 1000' spool of ½ inch hardline circa 2000 of unknown age (I don't
recall the make, it wasn't Andrew, but it was compatible with the most common
LDF4-50 connectors). I did note there was some oxidation of the copper near
the cut ends, but cut off a few inches or more to get to clean copper.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|