[TowerTalk] Lift Mast to Replace Rotator

Towertalk

[TowerTalk] Lift Mast to Replace Rotator

To:	<TowerTalk@contesting.com>
Subject:	[TowerTalk] Lift Mast to Replace Rotator
From:	"John Sloop" <hawkeye78299@gmail.com>
Date:	Thu, 26 Dec 2019 16:02:14 -0600
List-post:	<mailto:towertalk@contesting.com>

I'm looking for suggestions to lift mast, with antennas just enough to
replace the rotator, which is a Ham III.  Rotator is shelf mounted about 2
feet below the top thrust bearing.  All ideas are appreciated.

 

John S.

AA0ES

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] Lift Mast to Replace Rotator, John Sloop <= Re: [TowerTalk] Lift Mast to Replace Rotator, Tim Duffy Re: [TowerTalk] Lift Mast to Replace Rotator, Doug Turnbull Re: [TowerTalk] Lift Mast to Replace Rotator, Charles Gallo Re: [TowerTalk] Lift Mast to Replace Rotator, K9MA Re: [TowerTalk] Lift Mast to Replace Rotator, Wayne Kline Re: [TowerTalk] Lift Mast to Replace Rotator, W3YY Re: [TowerTalk] Lift Mast to Replace Rotator, lesbrown Re: [TowerTalk] Lift Mast to Replace Rotator, David Gilbert Re: [TowerTalk] Lift Mast to Replace Rotator, W3YY Re: [TowerTalk] Lift Mast to Replace Rotator, Robert Harmon

Previous by Date:	[TowerTalk] D, Dave K1MO
Next by Date:	Re: [TowerTalk] Lift Mast to Replace Rotator, Tim Duffy
Previous by Thread:	[TowerTalk] D, Dave K1MO
Next by Thread:	Re: [TowerTalk] Lift Mast to Replace Rotator, Tim Duffy
Indexes:	[Date] [Thread] [Top] [All Lists]