Towertalk
[Top] [All Lists]

Re: [TowerTalk] Which Vertical is More Robust ?

To: "Joe Subich, W4TV" <lists@subich.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] Which Vertical is More Robust ?
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Wed, 1 Jan 2020 11:55:49 -0800
List-post: <mailto:towertalk@contesting.com>
Correction:

The strength of a solid rod increases as the CUBE of
the radius.  However, for a thin wall hollow tube,
it increases roughly proportionately to the square
of the outer radius, or exactly the difference
between the cubes of the outer radius and inner
radius.

What does increase as the fourth power of radius is
the STIFFNESS of a solid rod.

Rick N6RK


On 1/1/2020 11:41 AM, Joe Subich, W4TV wrote:


I was just wondering, since I am starting from scratch  if having
larger dia tubing was a plus or a minus when all the factors are
considered. BTW the EMT and aluminum tubing have about the same wall
thickness (0.065" & 0.058").
Since the "strength" increases at the fourth power of the radius of
the tube while the load increases at 2 x the radius, without running
the exact specifics, I would suggest the larger diameter version will
be stronger overall.

73,

    ... Joe, W4TV

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>