Towertalk
[Top] [All Lists]

Re: [TowerTalk] Broadcast Band Filter

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Broadcast Band Filter
From: Jeff Blaine <KeepWalking188@ac0c.com>
Date: Fri, 27 Mar 2020 13:49:53 -0500
List-post: <mailto:towertalk@contesting.com>
If the mixing product is internal to the rig, the filter will help.

What John is talking about is rectification/mixing occurring outside somewhere (rusted metal contact, something weird but not infrequent) so that the antenna is picking up an 80m signal.  You hear the something, but in this case the interference is "in band" and thus the filter won't help at all.

The easy way to check the location (in the rig or external) is to dial in some attenuation.  If the interference product drops faster than the amount of attenuation (e.g. 6 db of attenuation results in the interference dropping by around 20 db), then it's a problem inside the rig (overload) and the filter will help.  If the interference drops by the same amount as the attenuation, then it's outside the rig somewhere and the hunt for that as well as mitigation is a project...

73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com


On 3/27/20 1:11 PM, David Gilbert wrote:

I don't understand your comment.  A filter is a filter.  Assuming we're talking a band reject filter, if the filter is between the source of the AM signal and the rig, even if the source is due to rectification, the filter should still do its job.  Why would it not?

73,
Dave   AB7E




On 3/27/2020 5:43 AM, john@kk9a.com wrote:
Probably Array Solutions, DX Engineering and maybe VA6AM have broadcast filters however if there is rectification occurring they will likely not help. At my station in Chicagoland I could hear a mix of two AM broadcast stations on my 80m TX antenna which was quite annoying at times. I never tried a specialized filter because I did not feel that it was a RX overload issue.

John KK9A


Mike Ryan mryan001 wrote:


I remember someone recommending a brick wall AM broadcast band filter some
months back.  Was a little on the expensive side but.if it works. Anyone
recall that thread and the name and/or contact for the manufacturer or
dealer?  Thanks.   - Mike

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>