Tim,
That is EXACTLY the right answer!
Having managed the installation of many guyed towers for microwave
communications sites, I know you don’t start any construction without the
stamped and signed PE calculations!
73,
Steve
N6SJ
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Tim Duffy
Sent: Monday, April 13, 2020 8:11 PM
To: 'Fredrick Matos' <blainefred@icloud.com>; 'Wayne Kline' <w3ea@hotmail.com>
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Guy Wire Anchors
Hello Fred:
You must do what the manufacture says.
Please take your question to the engineers at your tower manufacture and listen
to their advice.
Please do what is the properly engineered solution.
73
Tim K3LR
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Fredrick
Matos via TowerTalk
Sent: Monday, April 13, 2020 11:05 PM
To: Wayne Kline
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Guy Wire Anchors
Tnx.
Good anchors have pullout resistance specs that vary depending on the type of
anchor and the soil. The pullout specs on the American model PE46-guy are
very impressive when compared to the anchors with single discs. I don’t know
if Rohn provides pullout specs with their anchors, but they should.
73,
Fred W3ICM
Sent from my iPhone
> On Apr 13, 2020, at 10:14 PM, Wayne Kline <w3ea@hotmail.com> wrote:
>
>
> Fred,
>
> Not sure of your applications for these BUT IMHO I don’t think it’s an
> appropriate anchor for tower installation .
>
> All guys tower manufacture have speck for there hight/windload/anchor
> specifications.
>
> Build it to spec and you can’t go wrong
>
> Wayne W3EA ,
> Sent from Mail for Windows 10
>
> From: Fredrick Matos via TowerTalk
> Sent: Monday, April 13, 2020 3:44 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Guy Wire Anchors
>
> I have researched guy-wire anchors and found these made by the American Earth
> Anchors Co. in Rhode Island/
>
>
> They are pricey but the best part is that they can be easily driven into the
> ground with an impact wrench. They have excellent pull-out resistance specs.
> Almost too good to believe, which makes me skeptical.
>
>
> https://americanea.americommerce.com/PE46-Guy-anchor-46-inch-Penetrator-with-guying-head.htm
>
>
>
> Their home page has a video of a 4-foot model being screwed into the ground
> in a few minutes.
>
>
>
> Has anyone used these types of anchors?
>
>
> Or do you know people who have, and what is the result?
>
>
> t would appreciate views and opinions.
>
>
>
> tnx es 73
>
>
> Fred W3ICM
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|