Towertalk
[Top] [All Lists]

Re: [TowerTalk] Unequal Radial Currents

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Unequal Radial Currents
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Sat, 29 Aug 2020 18:44:00 -0700
List-post: <mailto:towertalk@contesting.com>
Great post, Dennis. Was not familiar with Dick's work, but what you cite is consistent with extensive work that N6LF has published on his excellent website, which I have often referenced. Mostly that current distribution affects LOSS, not directivity. But loss in the far field certainly DOES affect directivity.

73, Jim K9YC

On 8/29/2020 5:44 PM, Dennis W0JX via TowerTalk wrote:
Unequal currents in 1/4 wave radials is to be expected primarily due to three 
factors: 1.) varying quality of the ground under each radial; 2.) the effect of 
close by objects such as buildings and other towers; and 3.) the variation in 
the length of the radial wires depending on type of wire, insulation, and 
construction methods. Effect on the actual radiation pattern depends, of 
course, on the severity of the current variation and the number of radials 
utilized.
Dick Weber, K5IU, wrote a very informative article in the late 90's which was 
published in Communications Quarterly. He argued that 1/4 wave long radials 
were the poorest length on could use.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>