Why remove them?
Al
AB2ZY
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
bemeier@bellsouth.net
Sent: Wednesday, October 14, 2020 2:15 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Control and coax cable removal question
In the process of reducing my tower / antenna farm there are now several
control and coax cables that I would like to remove. The problem here is
they are fed from the outside of the house to the inside through a PVC
conduit which I sealed with spray foam. (Was a great idea at the time. No
critters, no hot/cold air, etc. for 14 years.) However, I can't get the
cables out because the foam is holding them firm. In addition to the
outside / inside conduit, I also have one between the crawl space and a
closet used to route the cables to the ham shack. The length of each of
these foam dams is roughly 6".
I have tried a long screwdriver and got some out. I also tried different
diameter crochet hooks but they did virtually nothing. I don't have any
other mechanical ideas that won't damage the insulation.
Does anyone know some type of a solvent (or other method) that would
dissolve the foam without hurting the insulation on the control / coax
cables?
Thanks and 73,
Bruce N1LN
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk