Bill,
I currently use the Yaesu 065 on my HDX-555 tower supporting a 4-element
SteppIR. I will be putting a 2-element 40-meter yagi above it in the
near future. I previously used one on my HG-54HD tower supporting a
Force-12 C4-XLD. Both work great.
Semper Fi,
Tommy - K6YE
DX IS and CW RULES
Good luck in your quest.
On 2020-11-25 13:30, Bill via TowerTalk wrote:
After using TB-3 thrust bearings for years, I'm looking into the Yaesu
ones. Usual problem with the TB-3s..over time they develop flt spots
and cranky rotation.
I'll be doing swinging arms and for most antennas. Yaesu makes two
I'm intyerested in: YAESU GS-065 65MM and the GS-680U. Other than
the second is supposed to be self aligining, are there any difference
in strength, durabilty etc.
Bill K4XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|