Towertalk
[Top] [All Lists]

Re: [TowerTalk] How critical is the 120 degree ...

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] How critical is the 120 degree ...
From: <john@kk9a.com>
Date: Tue, 27 Jul 2021 07:56:30 -0400
List-post: <mailto:towertalk@contesting.com>
In the U.S., the standard guy anchor distance is 80% of the tower height but
I have heard in Europe 60% is more common.  Is that correct?

I have no answers to your questions but if you are using a rotating tower I
believe that a larger anchor distance makes it easier for the guy bearings
to turn.

John KK9A


Jari Jussila oh2bu wrote:

Hi ...

I'm sure these topics have been discussed earlier, but could not find 
any thread ..... Sri ...

We are at our club erecting two towers. A rotating steel tower being 31 
m high and a aluminium telescope mast 18+18 m = 32 meters.

B) The steel tower height is 31 m - it's a rotating tower - but the 
upper bearing is at 23 m ( leaving 8 meters for the antennas) and the 
lower bearing at 11 meters.

Whats the advise of anchor point distance? Some say, that the 60 % 
(distance for  the tower) should be calculating from the total height 
(31 x 0,6 = 18,6 meters).
Some say, it should be calculating from  the upper bearing (23 m x 0,6 = 
12.8 m)

Whats your opinion?

Jari, OH2BU
For OH3AC Club Station



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>