On 12/2/2024 8:26 AM, Mpridesti via TowerTalk wrote:
by adding 18 inches of cable length (choke length) does the phasing line length need to be shortened by 18 inches?
YES, if it's inserted at the base of each vertical element, as it should
be, it becomes part of the phasing line. And be sure to consider the VF
of the feedline you're using for both the choke and the phasing line.
Also, the choke should be 75 ohm coax; there are photos and text about
suitable coax in my Cookbook. k9yc.com/publish.htm
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|