Towertalk
[Top] [All Lists]

Re: [TowerTalk] Sealing rotor connectors

To: Towertalk Reflector <towertalk@contesting.com>
Subject: Re: [TowerTalk] Sealing rotor connectors
From: Pete Michaelis - N8TR <pete.n8tr@gmail.com>
Date: Tue, 23 Sep 2025 22:13:53 -0400
List-post: <mailto:towertalk@contesting.com>
I endorse what Jon said about not sealing the terminal strips. However, I always used Stainless Steel screws in the terminal strips. The rotors I ended up with all had
standard steel screws screws and I replaced them with #6x32 1/4" SS ones.

73, Pete - N8TR



At 07:44 PM 9/23/2025, Jon Zaimes, AA1K via TowerTalk wrote:
On my own towers I don't seal them. Let them breathe! Any sealant put over the terminals just makes future maintenance more difficult.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>