[AMPS] Selling 3CPX5000's

[w8jitom@postoffice.worldnet.att.net]

I have a batch of 3CPX5000 pull-outs from an equipment changeover 
(they went to solid state) available. The tubes are mixed unused 
(spare equipment) and used but full power pulls from RF pulse 
transmitters.

These tubes require NO socket (they have a drilled grid flange and 
screw terminals for the cathode and filament). They have a 
3CX15000B7 cathode and grid inside a 4CX5000 style anode cooler. 
Heater requirements are modest at 15 volts 15 amps. With 7000 
volts on the anode in cathode driven service they output a very 
clean (typically in the -50 dB third order range) two tone signal of 
10000 watts with 200 watts of drive.

No messy screen supply, no tetrode instability, easy-to-tune, and 
capable of many ten's of kilowatts on peaks. $350  each or 
2 for $600 with 60 day guarantee.

73 Tom

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm