[AMPS] More amplifier experiments

[Jon Ogden]

>In addition
>to the above, install a 10 ohm 1/2 watt resistor in series with a 25pf
>disk ceramic cap from each filament pin to chassis ground. Mount the
>ground lugs as close to the tube socket as you can get to allow for short
>leads. This mod is highly effective and recommended if you run the 4X1 at
>6kv.

AG6K recommends this as part of his 4-1000A supressor kit.

Got them in mine.

73,

Jon
KE9NA


--------------------------------------------------------------------------
Jon Ogden

jono@webspun.com
www.qsl.net/ke9na

"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm