[AMPS] Parallel power transformers

Mark S Graalman wb8jkr@juno.com
Sun, 08 Nov 1998 06:38:59 EST


  Sure can, just make sure the winding phase
is correct.

Mark  WB8JKR

On Sat, 7 Nov 1998 22:50:02 -0500 "frank ayers jr" <LOMAX1@prodigy.net>
writes:
>
>Got a question from somebody today. He has two identical power
>transformers, each 120v in and 1800 v at 500ma out. The question is 
>could
>these be put primaries in series and secondaries in parallel to give a 
>220
>v primary 1800v @ 1 amp secondary?
>Theoretically yes, but what about running a real world amp with that 
>thing?
>I'd be tempted not to, but any ideas?
>
>Thanks
>Frank
>W2FCA
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm