[AMPS] filament pins

[Peter Chadwick]

Some versions of the 4-125, 250, 400 etc have silver plated pins - certainly
the tubes made by Philips/Mullard and possibly Amperex. Using Goddard's
'Silver Dip' (I believe it's available in the US) as intended for silver
jewellery/trays etc is a good easy way to clean those pins. The
Mullard/Philips variants don't have the metal ring base of the Eimac's -
there are/were Eimac variants without the metal ring base listed as
equivalents, but I don't know about the pin material on those. 

Although the silver oxide is supposed to be a conductor, I'm not sure about
the black silver sulphide. The pins appear to run cooler after cleaning, as
far as I can tell with a few minutes testing. Silver Dip works for switches,
too.

73

Peter G3RZP

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm