R: [AMPS] voltage drop

[Mark Hall]

I would get a HV probe, and look at the "DC/ripple" output with a
scope.  Likely a combination of all three factors contribute (Secondary
resistance, line voltage drop, voltage doubler droop/capacitance etc).
The scope would identify which factor contributes the most, and indicate
the solution.  Your last suggestion (remove the Volt Meter) might be the
best idea.

'73  KI4Z


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm