[AMPS] HV Bypass Question

[Jon Ogden]

>>Got a question regarding the plate RFC and bypass caps.  How near to the 
>>B+ bypass caps should the plate RFC really be?  
>
>€  . It matters little how much L is in the lead to the hv-rfc.  The 
>choke already has plenty of L, so a bit more does not matter.  However 
>the gnd side of the bypass caps should go directly to gnd.

That's what I thought; I just wanted to make sure my thinking was correct.  And yes, the doorknobs are connected directly to ground.
  

>>"A life lived in fear is a life half lived."
>>
>€  A person who works on amplifiers, who lives not in fear of 
>anode-supplies,  may live half of a normal life.  

That's good, Rich! But I wouldn't call it a "fear" of anode supplies.  Those people don't build PAs.  I would call it a "healthy respect."  That you need to have!

73,

Jon
KE9NA


--------------------------------------------------------------------------
Jon Ogden

jono@enteract.com
www.qsl.net/ke9na

"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm