1999-January Archives by Thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jan 1 01:18:59 1999
Ending: Sun Jan 31 23:16:53 1999
Messages: 676

• [AMPS] Dollars per dB   DavidC
  • [AMPS] Dollars per dB   Radio WC6W
• [AMPS] Dollars per dB   Larry L. Ravlin
  • [AMPS] Dollars per dB   T A RUSSELL
    • [AMPS] Dollars per dB   Pete Smith
      • [AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB)   Scott Townley
• [AMPS] Dollars per dB/4cx10000   igor rosky
  • [AMPS] Dollars per dB/4cx10000   Alek Petkovic
• [AMPS] NCL-2000 comments   Rich Measures
• [AMPS] Dollars per dB   Rich Measures
• [AMPS] Smoking/Eating in the Multi Op Room!?   Ian White, G3SEK
• [AMPS] Dollars per dB   John Fielding
• [AMPS] Dollars per dB   km1h@juno.com
• [AMPS] Re: Dollars per dB   DavidC
• [AMPS] Dollars per dB   Rich Measures
• [AMPS] Dollars per dB   Zdzislaw R Sawicki
• [AMPS] Re: Dollars per dB   km1h@juno.com
• [AMPS] TX Ant/RX Ant Gain and Noise...again   Scott Townley
  • [AMPS] TX Ant/RX Ant Gain and Noise...again   Phil T. (VE3OZZ)
• [AMPS] Dollars per dB   km1h@juno.com
• [AMPS] QRO vs Beams   cd
• [AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB)   km1h@juno.com
• [AMPS] palomar 90-a   NI4L
• [AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB)   Michael Tope
• [AMPS] Icom 4KL   Andy Wallace
• [AMPS] TX Ant gain, etc.   km1h@juno.com
• [AMPS] Henry in Italy   IK4ZIF
  • [AMPS] Henry in Italy   Radiodan W7RF
• [AMPS] FS: 6 Band amp input PC Boards.   km1h@juno.com
• [AMPS] Dollars per dB   Jon Ogden
• [AMPS] FS; Lysco GDO   km1h@juno.com
  • [AMPS] FS; Lysco GDO   Phil T. (VE3OZZ)
• [AMPS] Half-wave Vertical Dipoles at WWVH   Jim Reid
• [AMPS] Dollars per dB   km1h@juno.com
  • [AMPS] Dollars per dB   T A RUSSELL
• [AMPS] Dollars per dB   Rich Measures
• [AMPS] Dollars per dB   Doug Hall
  • [AMPS] Dollars per dB   Vic Rosenthal
• [AMPS] 208u10 for sale clean 10kw   john merryman
• [AMPS] Tube dimension question   frank ayers jr
  • [AMPS] Tube dimension question   dan hearn
• [AMPS] FS : 24-28VDC Supplies   km1h@juno.com
• [AMPS] Capacitors 220 @ 450wv   robert witt
• [AMPS] Class E   Radio WC6W
• [AMPS] Mcmartin BA-10K transmitter   Kf8od@aol.com
• [AMPS] Mcmartin BA-10K transmitter   Jim
• [AMPS] Tube dimension question   Jim
• [AMPS] pa tubes   Larry L. Ravlin
• [AMPS] Mcmartin BA-10K transmitter   Bill Coleman N2BC
• [AMPS] Dollars per dB   Jon Ogden
• [AMPS] Mcmartin BA-10K transmitter   Jim AH6OY
• [AMPS] Line input wiring   Peter Chadwick
• [AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB)   Peter Chadwick
• [AMPS] Line input wiring   Peter Chadwick
• [AMPS] Re: 75 ohm cable   Fraser Robertson
• [AMPS] Re: FS : 24-28VDC Supplies   km1h@juno.com
• [AMPS] TX Ant gain vs. RX Ant gain (was: Dollars per dB)   km1h@juno.com
• [AMPS] Dollars per dB   km1h@juno.com
• [AMPS] Mcmartin BA-10K transmitter   Rich Measures
• [AMPS] Dollars per dB   Rich Measures
• [AMPS] Point well taken   Kf8od@aol.com
• [AMPS] Dollars per dB   frank ayers jr
• [AMPS] Fw: Heath Cantenna oil - PCB's?   Jim AH6OY
• [AMPS] Fw: Heath Cantenna oil - PCB's?   Jim
• [AMPS] Plate load charts   Jim
  • [AMPS] Plate load charts   Ian White, G3SEK
• [AMPS] Plate load charts   Rich Measures
• [AMPS] Plate load charts   Peter Chadwick
• [AMPS] Plate load charts   Rich Measures
• [AMPS] Plate load charts   Peter Chadwick
• [AMPS] Plate load charts   yo3ctk@qsl.net
• [AMPS] Plate load charts   Peter Chadwick
• [AMPS] Plate load charts   Rich Measures
  • [AMPS] Plate load charts   Ian White, G3SEK
• [AMPS] Plate load charts   km1h@juno.com
• [AMPS] Plate load charts   km1h@juno.com
  • [AMPS] Plate load charts   T A RUSSELL
    • [AMPS] Plate load charts   Roger D. Johnson
• [AMPS] Dollars per dB   zeitler@ibm.net
• [AMPS] ACOM 2000?   Jim
  • [AMPS] ACOM 2000?   Andrew Chesnokov
• [AMPS] Plate load charts   John Fielding
• [AMPS] Plate voltage   Douglas Johnson
• [AMPS] Plate voltage   Rich Measures
• [AMPS] Plate load charts   K3BU@aol.com
• [AMPS] Need SB220 bandswitch   Lynn D. Osterbur
• [AMPS] Fw: Fw: 3.2KV Plate Transformers, Two IDENTICAL Units Available   km1h@juno.com
• [AMPS] Need SB220 bandswitch   km1h@juno.com
• [AMPS] arcing in tube?   Dick McDuffie
• [AMPS] Plate load charts   Rich Measures
• [AMPS] RJ1A coil   Merv Schweigert
• [AMPS] arcing in tube?   Rich Measures
• [AMPS] Plate load charts   km1h@juno.com
• [AMPS] arcing in tube?   km1h@juno.com
• [AMPS] Plate load charts   Peter Chadwick
• [AMPS] arcing in tube?   Peter Chadwick
• Fw: [AMPS] Plate load charts   Jim
• [AMPS] arcing in tube?   km1h@juno.com
• [AMPS] Plate load charts   Rich Measures
• Fw: [AMPS] Plate load charts   Rich Measures
• [AMPS] Henry Roller Coil   zeitler@ibm.net
• [AMPS] Re: Henry Roller Coil   Rich Measures
• [AMPS] WTB: Alpha 91B   Hisa Iwasaki
• [AMPS] Components   marv gonsior
• [AMPS] 28 amp 220 variac   Jim
• [AMPS] Henry Roller Coil   zeitler@ibm.net
  • [AMPS] Henry Roller Coil   Radio WC6W
• [AMPS] E F Johnson Roller   Arne Gjerning
• [AMPS] Plate load charts   km1h@juno.com
• [AMPS] E F Johnson Roller   km1h@juno.com
• [AMPS] Henry Roller Coil   km1h@juno.com
• [AMPS] Henry Roller Coil   km1h@juno.com
• [AMPS] Re: Henry Roller Coil   Rich Measures
• [AMPS] Plate load charts   Rich Measures
• [AMPS] E F Johnson Roller   Rich Measures
• [AMPS] Re: Henry Roller Coil   Rich Measures
• [AMPS] E F Johnson Roller   Peter Chadwick
• [AMPS] E F Johnson Roller   Rich Measures
• [AMPS] 28 amp 220 variac   Jim
• [AMPS] Components   marv gonsior
• [AMPS] Plate load charts   km1h@juno.com
• [AMPS] Plate load charts   Rich Measures
• [AMPS] Plate load charts   km1h@juno.com
• [AMPS] Plate load charts   Rich Measures
• [AMPS] Jennings vacuum relays. . .   f117ab@ameritech.net
• [AMPS] Eimac FGQB3020   K4SO@aol.com
  • [AMPS] Eimac FGQB3020   NI4L
• [AMPS] Conversion of L-4B Amp to 3CX1200   Jeff Weinberg W8CQ
• [AMPS] Henry 2KD-5 Plate Xmfr FS $75.00   zeitler@ibm.net
• [AMPS] TL-922 fuses   Roger D. Johnson
• [AMPS] Tesla coil effects in open turns of coils   John Lyles
• [AMPS] Wanted: 3-1000Z New or Used   Frank Donovan W3LPL
  • [AMPS] Wanted: 3-1000Z New or Used   Tom Quay - KT3TT
• [AMPS] TL-922 fuses   DavidC
• [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   dan hearn
• [AMPS] Viewstar PT-2500 for sale   Jim
• [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   Jon Ogden
  • [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   Mark S Graalman
  • [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   dan hearn
• [AMPS] Tesla coil effects in open turns of coils   Rich Measures
• [AMPS] TL-922 fuses   Rich Measures
• [AMPS] Tesla coil effects in open turns of coils   km1h@juno.com
• [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   Rich Measures
  • [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   Bill Turner, W7TI
• [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   km1h@juno.com
• [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   Paul Christensen
• [AMPS] Info tubes CW-715B ??   lu7dw@abaconet.com.ar
• [AMPS] RE: Wanted 3-1000Z   GÖTE NORDQVIST
• [AMPS] 4CX1500B   Tarrant David
• [AMPS] SB-220 Meter Replacement   Walter Fairclough
  • [AMPS] SB-220 Meter Replacement   NI4L
• [AMPS] Burle 8890 on 1296   Kf8od@aol.com
• [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   frank ayers jr
• [AMPS] Info tubes CW-715B ??   km1h@juno.com
• [AMPS] SB-220 Meter Replacement   km1h@juno.com
• [AMPS] Radio Switch   Arne Gjerning
• [AMPS] HV CAPACITORS   M.J.Willis
• [AMPS] 4CX1500B   Rich Measures
• [AMPS] Rapid Warmup Indirectly Heated Cathode Tubes   John Fielding
• [AMPS] 4CX1500B   John Fielding
• [AMPS] Radio Switch   W/C Kornienko
• [AMPS] PIN diodes   km1h@juno.com
• [AMPS] Test - IGNORE!   Jon Ogden
• [AMPS] Switch for LK-500ZA   Greg Gobleman
• [AMPS] Are 8950's Good on 6m?   DavidC
• [AMPS] 8877 3 min Wait   K4ab@aol.com
• [AMPS] 4-1000A plate caps   Dick McDuffie
• [AMPS] Dentron Clipperton-V   f117ab@ameritech.net
• [AMPS] 8877 3 min Wait   Rich Measures
• [AMPS] HV Bypass Question   Jon Ogden
• [AMPS] Re: Alpha 76CA tube swap   KA2YKC@aol.com
  • [AMPS] Re: Alpha 76CA tube swap   Kenneth D. Grimm, K4XL
  • [AMPS] Re: Alpha 76CA tube swap   Terry Gaiser
• [AMPS] Looking for an SB-220 minus tubes   zeitler@ibm.net
• [AMPS] Re: Alpha 76CA tube swap   Rich Measures
• [AMPS] HV Bypass Question   Rich Measures
• [AMPS] HV Bypass Question   Jon Ogden
• [AMPS] tube anode cap, etc.   John Lyles
  • [AMPS] tube anode cap, etc.   w3am@juno.com
• [AMPS] tube anode cap, etc.   Jon Ogden
• [AMPS] air varible cap   km1h@juno.com
• [AMPS] value of plate tune cap in LK-500ZA   zeitler@ibm.net
• [AMPS] value of plate tune cap in LK-500ZA   Rich Measures
• [AMPS] Are 8950's Good on 6m?   Skip S Isaham
• [AMPS] amplifier picture web site.   Skip S Isaham
• [AMPS] value of plate tune cap in LK-500ZA   km1h@juno.com
• [AMPS] air varible cap   Ron Spencer
• [AMPS] New Alpha amps   km1h@juno.com
• [AMPS] Re: Alpha 76CA tube swap   km1h@juno.com
  • [AMPS] Re: Alpha 76CA tube swap   pmarkham
• [AMPS] Dentron 2000l   NI4L
• [AMPS] FS: DTR-2000L Tank Circuit   km1h@juno.com
• [AMPS] FS: Tune and Load Variable Caps   km1h@juno.com
• [AMPS] Need To Contact Tom Bruckner   Phil Clements
• [AMPS] Tube identification   K4SO@aol.com
• [AMPS] 8uF 4kvdc oil filled FS $25.00   zeitler@ibm.net
• [AMPS] WTB: MLA2500 Amp   Zdzislaw R Sawicki
• [AMPS] HV Connectors   Carl Clawson
  • [AMPS] HV Connectors   Ian White, G3SEK
  • [AMPS] HV Connectors   Bill Turner, W7TI
    • [AMPS] HV Connectors   Mark Hall
• [AMPS] RF Switch Wanted   Arne Gjerning
• [AMPS] 8122 tubes for sale   Arne Gjerning
• [AMPS] HV Connectors   Rich Measures
• [AMPS] Want Dow Key or Transco Y relays   f117ab@ameritech.net
• [AMPS] Re: Alpha 76CA tube swap   km1h@juno.com
• [AMPS] Guesstimating RF Component Specs   Carl Clawson
• [AMPS] HV Connectors   km1h@juno.com
  • [AMPS] HV Connectors   Ian White, G3SEK
• [AMPS] 8122 tubes for sale   km1h@juno.com
• [AMPS] Guesstimating RF Component Specs   km1h@juno.com
• [AMPS] Johnson Viking Invader PS for sale   Jon Ogden
• [AMPS] Tube identification   Jon Ogden
• [AMPS] Guesstimating RF Component Specs   Jon Ogden
• [AMPS] Tube identification   km1h@juno.com
• [AMPS] AL-82   km1h@juno.com
• [AMPS] AL-82   Mike Michon
• [AMPS] HV Connectors   tacook
  • [AMPS] HV Connectors   Alek Petkovic
• [AMPS] AL-82   Mike Michon
  • [AMPS] AL-82   Mark S Graalman
• [AMPS] need dead or dying SB-200   zeitler@ibm.net
• [AMPS] SB-220 cover&case   DocMD
• [AMPS] AL-82   Rich Measures
• [AMPS] Guesstimating RF Component Specs   Rich Measures
• [AMPS] AL-82   Roy Koeppe
• [AMPS] AL-82   Roy Koeppe
• [AMPS] AL-82   km1h@juno.com
• [AMPS] AL-82   Rich Measures
• [AMPS] AL-82   km1h@juno.com
  • [AMPS] AL-82   Shawn Tayler
• [AMPS] AL-82   Mike Michon
• [AMPS] Motorhead... Tube identification   Skip S Isaham
• [AMPS] MHV & SHV Connector supplies.   Skip S Isaham
• [AMPS] AL-82   Rich Measures
• [AMPS] more...Tube identification   Skip S Isaham
• [AMPS] MHV & SHV Connector supplies.   km1h@juno.com
• [AMPS] HV Connectors   km1h@juno.com
  • [AMPS] HV Connectors   Kenneth D. Grimm, K4XL
  • [AMPS] HV Connectors   Ian White, G3SEK
• [AMPS] Rohn Tower discounter in NE   km1h@juno.com
• [AMPS] FL2100B No Output   DanAF9R@aol.com
• [AMPS] documentation   Smirk5766@aol.com
• [AMPS] Tube info   Arne Gjerning
• [AMPS] amp manuals   Smirk5766@aol.com
  • [AMPS] amp manuals   NI4L
• [AMPS] FL2100B No Output   km1h@juno.com
• [AMPS] HV Connectors   km1h@juno.com
• [AMPS] HV Connectors   Rich Measures
  • [AMPS] HV Connectors   Steve
• [AMPS] RG-58: living dangerously?   zeitler@ibm.net
• [AMPS] RG-58: living dangerously?   Gilmer, Mike
• [AMPS] RG-58: living dangerously?   Gilmer, Mike
  • [AMPS] RG-58: living dangerously?   Steve Thompson
• [AMPS] Re: RG-58: living dangerously?   Rich Measures
• [AMPS] 1/4 wave stubs   zeitler@ibm.net
• [AMPS] High Voltage xfmrs   Jim
• [AMPS] Tube info RS 1012L   Brian Kline
• [AMPS] 4-1000 anode flange   Bill Coleman
• [AMPS] Need 4cx1600U info   Bob Dodson WB5APD EM84ak
• [AMPS] Re: Amps Digest V2 #11   John Lyles
• [AMPS] groth turn counters   Rich Measures
• [AMPS] "Commercial" HV connectors and cable   Dave
• [AMPS] Transformer ID and info   Steve
• [AMPS] EF Johnson Rotary Inductor for sale   be
• [AMPS] groth turn counters   Ron Spencer
  • [AMPS] HTML on reflectors   Pete Smith
• [AMPS] Adjusting fil voltage   Roy Koeppe
  • [AMPS] Adjusting fil voltage   Radiodan W7RF
• [AMPS] price for 3CX800   zeitler@ibm.net
• [AMPS] Spinner knob.   Radiodan W7RF
• [AMPS] Adjusting fil voltage   Rich Measures
  • [AMPS] Adjusting fil voltage   pmarkham
    • [AMPS] Adjusting fil voltage   Mark S Graalman
  • [AMPS] Adjusting fil voltage   Ian White, G3SEK
  • [AMPS] Adjusting fil voltage   Radiodan W7RF
• [AMPS] price for 3CX800   John Cunliffe
• [AMPS] Circuit boards   Merv Schweigert
• [AMPS] Spinner knob.   Roy Koeppe
• [AMPS] Circuit boards   km1h@juno.com
• [AMPS] UTC CG-308 Plate Transformer   Steven M. Cutshall
• [AMPS] UTC CG-308 Plate Transformer   Jim
• [AMPS] UTC CG-308 Plate Transformer   Jim
• [AMPS] In-rush Protection   Roy Koeppe
• [AMPS] 100KW induction furnace   Kf8od@aol.com
• [AMPS] Adjusting fil voltage   Rich Measures
• [AMPS] 100KW induction furnace   Rich Measures
• [AMPS] Adjusting fil voltage   Roy Koeppe
• [AMPS] 100KW induction furnace   Roy Koeppe
  • [AMPS] 100KW induction furnace   Bill Henderson
• [AMPS] Adjusting fil voltage   Rich Measures
• [AMPS] RE: UTC CG - 308   Steven M. Cutshall
• [AMPS] 4cx5000   Bill Murphy
  • [AMPS] 4cx5000   Terry Gaiser
• [AMPS] 4cx5000   km1h@juno.com
• [AMPS] 4cx5000   Rich Measures
• [AMPS] 100KW induction furnace   John Fielding
• [AMPS] 4cx5000   Rich Measures
• [AMPS] 4KW Linear Amplifier Power Supply Kit   Bill Cotter
• [AMPS] Vac Variable Mounting   Bill Coleman N2BC
• [AMPS] Photos of new RF power amplifier   John T. M. Lyles
• [AMPS] Vac Variable Mounting   Rich Measures
• [AMPS] induction furnace   Skip S Isaham
• [AMPS] Mo' Big Amps   John Lyles
• [AMPS] 4cx5000   km1h@juno.com
• [AMPS] blower motor for 374-a Alpha   tom hix
• [AMPS] Vac Variable Mounting   km1h@juno.com
  • [AMPS] Vac Variable Mounting   George T. Daughters
• [AMPS] Vac Variable Mounting   Jon Ogden
• [AMPS] 4cx5000   Jon Ogden
• [AMPS] 4cx5000   km1h@juno.com
  • [AMPS] 4cx5000   Steve
• [AMPS] 4cx5000   Bill Murphy
• [AMPS] L4B   tacook
• [AMPS] 4cx5000   John Cunliffe
• [AMPS] groth turns counters   Ron Spencer
• [AMPS] hp amps   Larry L. Ravlin
• [AMPS] blower motor for 374-a Alpha   APIN0HF@aol.com
• [AMPS] 8877 idling current   john
• [AMPS] Fw: Big tubes w/ handles   W6NQ
• [AMPS] 4cx5000   km1h@juno.com
• [AMPS] Turns counters & am tx.   Ron Spencer
• [AMPS] 4cx5000   km1h@juno.com
• [AMPS] 4cx5000   km1h@juno.com
• [AMPS] 8877 idling current   km1h@juno.com
• [AMPS] Turns counters   Ron Spencer
• [AMPS] Fw: Big tubes w/ handles   km1h@juno.com
• [AMPS] 4cx5000   John Cunliffe
• [AMPS] Svetlana Cyber Tour   marv gonsior
• [AMPS] Dead Zone   km1h@juno.com
• [AMPS] 4cx5000   Rich Measures
• [AMPS] Dead Zone   frank ayers jr
• [AMPS] Jones connector needed   Randy Stegemeyer
• [AMPS] Circuit boards   David A. Pruett
• [AMPS] am xmtr on 160 meters...   Skip S Isaham
• [AMPS] WTD:40-50A Switching Supply   RICHARD W SOLOMON
  • [AMPS] WTD:40-50A Switching Supply   dan hearn
• [AMPS] Alpha 77DX grid current   dan hearn
  • [AMPS] Alpha 77DX grid current   Mark S Graalman
• [AMPS] Alpha 77DX grid current   Paul Christensen
• [AMPS] Alpha 77DX grid current   km1h@juno.com
• [AMPS] To Ten-Tec Inc, et al, Re: Titan II   Roy Koeppe
• [AMPS] Re: Alpha grid current vs power out   Roy Koeppe
• [AMPS] slow machine...   Skip S Isaham
• [AMPS] Homebrew resistors   igor rosky
• [AMPS] 7/16th DIN Connectors   igor rosky
  • [AMPS] 7/16th DIN Connectors   Ted & Joyce Wilhelm
• [AMPS] Henry Roller Coil $15.00   zeitler@ibm.net
• [AMPS] My spelling in the last ad   zeitler@ibm.net
• [AMPS] 7/16th DIN Connectors   Skip S Isaham
• [AMPS] 7/16th DIN Connectors   km1h@juno.com
• [AMPS] coaxal relays   km1h@juno.com
• [AMPS] 7/16th DIN connectors   Dave
• [AMPS] 7/16th DIN Connectors   km1h@juno.com
• [AMPS] 7/16 din   igor rosky
  • [AMPS] 7/16 din   Ian White, G3SEK
• [AMPS] EF JOHNSON CAP VALUE   Harald Garberg Gule
• [AMPS] Re: Ceramic Caps in PA Tanks   Roy Koeppe
  • [AMPS] Re: Ceramic Caps in PA Tanks   dan hearn
• [AMPS] Re: Alpha grid current vs power out   Roy Koeppe
• [AMPS] How to slow down blower ?   Bob Dodson WB5APD EM84ak
  • [AMPS] How to slow down blower ?   rcook
• SV: [AMPS] 7/16 din   Harald Garberg Gule
• [AMPS] EF JOHNSON CAP VALUE   km1h@juno.com
• [AMPS] How to slow down blower ?   km1h@juno.com
• [AMPS] coaxal relays   Rich Measures
• [AMPS] To Ten-Tec Inc, et al, Re: Titan II   Rich Measures
• [AMPS] coaxal relays   Ron Spencer
• [AMPS] Re: Ceramic Caps in PA Tanks   km1h@juno.com
• [AMPS] coaxal relays   km1h@juno.com
• [AMPS] How to slow down blower ?   Rich Measures
• [AMPS] Kaput 8877 swap for suppressor retrofit-kit   Rich Measures
• [AMPS] How to slow down blower ?   Johan Nordin
• [AMPS] Re: Ceramic Caps in PA Tanks   Roy Koeppe
• [AMPS] ??? choke saturation   Arthur Moe
• [AMPS] Triode conected Tetrodes   Arthur Moe
• [AMPS] BIAS SUPPLY   Arthur Moe
• [AMPS] Triode conected Tetrodes   Rich Measures
  • [AMPS] Triode conected Tetrodes   Joe Subich, W8IK
• [AMPS] How to slow down blower ?   Rich Measures
• [AMPS] Triode conected Tetrodes   km1h@juno.com
• [AMPS] Triode conected Tetrodes   Rich Measures
• [AMPS] coaxal relays   Ron Spencer
• [AMPS] Triode conected Tetrodes   Radio WC6W
• [AMPS] Triode conected Tetrodes   Roy Koeppe
• [AMPS] big or small amps, we're all hams   John T. M. Lyles
• [AMPS] big or small amps, we're all hams   John Fielding
• [AMPS] Triode conected Tetrodes   Rich Measures
• [AMPS] Triode conected Tetrodes   Rich Measures
• [AMPS] big or small amps, we're all hams   john merryman
• [AMPS] Sigma amp? Value?   Lynn D. Osterbur
• [AMPS] big or small amps, we're all hams   Rich Measures
• [AMPS] glue   Larry L. Ravlin
• [AMPS] 8875 Max Voltage Question   Zdzislaw R Sawicki
• [AMPS] Sigma amp? Value?   km1h@juno.com
• [AMPS] 8875 Max Voltage Question   km1h@juno.com
• [AMPS] glue   Rich Measures
• [AMPS] more...Tube identification   Peter Chadwick
• [AMPS] glue   Peter Chadwick
• [AMPS] How to slow down blower ?   Peter Chadwick
• [AMPS] Triode conected Tetrodes   Peter Chadwick
• [AMPS] Bandwidth   Peter Chadwick
• [AMPS] L4B power supply   Will K6NDV
• [AMPS] big or small amps, we're all hams   Strohm, Jim
• [AMPS] L4B power supply   Larry L. Ravlin
• [AMPS] L4B power supply   km1h@juno.com
• [AMPS] big or small amps, we're all hams   Rich Measures
• [AMPS] L4B power supply   Peter Chadwick
• [AMPS] Bandwidth   Phil T. (VE3OZZ)
• [AMPS] big or small amps, we're all hams   Peter Chadwick
• [AMPS] big or small amps, we're all hams   John Fielding
• [AMPS] AM transmiter   Ron Spencer
• [AMPS] AIL-707 spares wanted   John Fielding
• [AMPS] L4B power supply   Rich Measures
• [AMPS] Bandwidth   Rich Measures
• [AMPS] Triode conected Tetrodes   Rich Measures
• [AMPS] big or small amps, we're all hams   Rich Measures
  • [AMPS] big or small amps, we're all hams   Pete Smith
• [AMPS] Henry 3K   Larry L. Ravlin
• [AMPS] Eimac Power Pentode.   Eric
  • [AMPS] Eimac Power Pentode.   Radio WC6W
• [AMPS] ARRL   Gilmer, Mike
• [AMPS] big tube problems with yeasu Fl2100B, please help!!!!!!   Theo Koning
• [AMPS] big tube problems with yeasu Fl2100B, please help!!!!!!   Theo Koning
• [AMPS] ARRL and QST   Jim Reid
  • [AMPS] ARRL and QST   Andy Wallace
    • [AMPS] ARRL and QST   T A RUSSELL
      • [AMPS] ARRL and QST   Bill Turner, W7TI
      • [AMPS] ARRL and QST   James D. Duffer
      • [AMPS] ARRL and QST   Bob Marston
• [AMPS] ARRL   K3BU@aol.com
• [AMPS] ARRL   Rich Measures
• [AMPS] ARRL   Jim
• [AMPS] ARRL   Alan Gray
• [AMPS] ARRL   Rich Measures
• [AMPS] ARRL and QST   Larry L. Ravlin
  • [AMPS] ARRL and QST   Bob Marston
    • [AMPS] ARRL and QST   Bob Marston
    • [AMPS] ARRL and QST   Andy Wallace
• [AMPS] ARRL and QST   Larry L. Ravlin
• [AMPS] How to slow down blower ?   W/C Kornienko
  • [AMPS] How to slow down blower ?   Bob Dodson WB5APD EM84ak
• [AMPS] glue   Jon Ogden
• [AMPS] Bandwidth   Jon Ogden
• [AMPS] big or small amps, we're all hams   Jon Ogden
• [AMPS] ARRL   Jon Ogden
• [AMPS] CW, the ARRL and QST   Jim Reid
  • [AMPS] CW, the ARRL and QST   Mark Brown
    • [AMPS] CW, the ARRL and QST   Andy Wallace
• [AMPS] ARRL   Jim
• [AMPS] ARRL and QST   Larry L. Ravlin
  • [AMPS] ARRL and QST   Bob Marston
• [AMPS] ARRL and QST   Jim Reid
• [AMPS] CW, the ARRL and QST   Jon Ogden
  • [AMPS] CW, the ARRL and QST   Paul Hicks, VE3BBH / VE3ZT
• [AMPS] ARRL   Jon Ogden
• [AMPS] ARRL and QST   Jon Ogden
• [AMPS] ARRL and QST   Jon Ogden
• [AMPS] big or small amps, we're all hams   km1h@juno.com
• [AMPS] L4B power supply   km1h@juno.com
• [AMPS] big or small amps, we're all hams   km1h@juno.com
• [AMPS] big or small amps, we're all hams   km1h@juno.com
• [AMPS] L4B power supply   km1h@juno.com
• [AMPS] Henry 3K   km1h@juno.com
• [AMPS] big tube problems with yeasu Fl2100B, please help!!!!!!   km1h@juno.com
• [AMPS] ARRL and QST   km1h@juno.com
• [AMPS] ARRL   km1h@juno.com
• [AMPS] glue   km1h@juno.com
  • [AMPS] glue   Bill Turner, W7TI
• [AMPS] big or small amps, we're all hams   Rich Measures
• [AMPS] glue   Peter Chadwick
• [AMPS] glue   Peter Chadwick
  • [AMPS] glue   Bill Henderson
• [AMPS] Is February QST out ?   yo3ctk@qsl.net
• [AMPS] ARRL & QST &CW   Ted & Joyce Wilhelm
• [AMPS] ARRL and QST   K3BU@aol.com
  • [AMPS] ARRL and QST   Andy Wallace
  • [AMPS] ARRL and QST   Bill Turner, W7TI
• [AMPS] DC rateing of AC oil capacitors   William L. Fuqua III
• [AMPS] ARRL and QST   John Brosnahan
  • [AMPS] ARRL and QST   Andy Wallace
• [AMPS] glue   Jon Ogden
• [AMPS] ARRL and QST   Jon Ogden
• [AMPS] ARRL and QST   Jon Ogden
• [AMPS] ARRL and QST   Gilmer, Mike
• [AMPS] ARRL and QST   Arthur Moe
• [AMPS] ARRL and QST   Larry L. Ravlin
  • [AMPS] ARRL and QST   Andy Wallace
• [AMPS] ARRL and QST   William L. Fuqua III
• [AMPS] ARRL and QST   Jim AH6OY
  • [AMPS] ARRL and QST   Andy Wallace
• [AMPS] ARRL and QST   Jim AH6OY
• [AMPS] glue   Gilmer, Mike
• [AMPS] Vacuum Cap needed   Stefano Brioschi
• [AMPS] My ham radio history (the early days)   William L. Fuqua III
  • [AMPS] My ham radio history (the early days)   Kenneth D. Grimm, K4XL
• [AMPS] Bandwidth   John Fielding
• [AMPS] Russian tubage   George K. Watson
• [AMPS] Aluminum sheet   John / NS1Z
  • [AMPS] Aluminum sheet   W7CW Jay E Ostrem
• [AMPS] Aluminum sheet   Strohm, Jim
• [AMPS] ARRL and QST   Andy Wallace
  • [AMPS] ARRL and QST (and CW Relevance)   T A RUSSELL
    • [AMPS] ARRL and QST (and CW Relevance)   Shawn Tayler
      • [AMPS] ARRL and QST (and CW Relevance)   Andy Wallace
      • [AMPS] ARRL and QST (and CW Relevance)   Bill Turner, W7TI
      • [AMPS] ARRL and QST (and CW Relevance)   Steven H. Sawyers n0yvy
    • [AMPS] ARRL and QST (and CW Relevance)   Tony Martin
    • [AMPS] ARRL and QST (and CW Relevance)   dan hearn
      • [AMPS] ARRL and QST (and CW Relevance)   Andy Wallace
    • [AMPS] ARRL and QST (and CW Relevance)   Andy Wallace
      • [AMPS] ARRL and QST(and CW Relevance)   LEE ROGER WICAL
    • [AMPS] ARRL and QST (and CW Relevance)   Bill Turner, W7TI
• [AMPS] ARRL and QST   Jon Ogden
• [AMPS] Need Amplifier Manuals   Jon Ogden
  • [AMPS] Need Amplifier Manuals   NI4L
• [AMPS] RE: [TowerTalk] hdbx or hbx? Or neither? (long, sorry)   Joe Subich, W8IK/4
• [AMPS] Tks for Sigma amp info   Lynn D. Osterbur
• [AMPS] Down Alpha 89 - Assistance Sought   Gary G Dein
• [AMPS] grid termination resistor value?   Skip S Isaham
  • [AMPS] grid termination resistor value?   Radio WC6W
• [AMPS] grid termination resistor value?   zeitler@ibm.net
• [AMPS] RE: Down Alpha 89   Gary G Dein
• [AMPS] epoxie   Ron Spencer
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Bob Marston
• [AMPS] 851 triode   John Lyles
• [AMPS] fl2100b mod   Erol
• [AMPS] ARRL and QST   Peter Chadwick
• [AMPS] grid termination resistor value?   Rich Measures
• [AMPS] grid termination resistor value?   Rich Measures
• [AMPS] grid termination resistor value?   Peter Chadwick
• [AMPS] RE: Down Alpha 89   Peter Chadwick
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bou nced" submission to [CW] from Bob Marston, K1TA [LONG] but please read a ll   Peter Chadwick
  • [AMPS] Re: SERIOUS commentary from N4XY on "no-code"   Vic Rosenthal
• [AMPS] ARRL and QST (and CW Relevance)   Gilmer, Mike
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Bob Marston
  • [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Andy Wallace
• [AMPS] ARRL and QST (and CW Relevance)   Peter Chadwick
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Rich Measures
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code"   Peter Chadwick
• [AMPS] ARRL and QST   John Fielding
• [AMPS] RE: Down Alpha 89   John Fielding
  • [AMPS] RE: Down Alpha 89   Shawn Tayler
    • [AMPS] RE: Down Alpha 89   Bob Marston
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code"   Michael Tope
• [AMPS] Re: Serious commentary from N4XY........................   Michael Tope
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Paul Christensen
  • [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Andy Wallace
  • [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   James D. Duffer
• [AMPS] Need Amplifier Manuals   W6NQ
• [AMPS] ARRL and QST(and CW Relevance)   John Fielding
• [AMPS] ARRL and QST (and CW Relevance)   K3BU@aol.com
• [AMPS] ARRL and QST (and CW Relevance)   Alan Gray
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Jon Ogden
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Jon Ogden
• [AMPS] Need Amplifier Manuals   Jon Ogden
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "b ounced" submission to [CW] from Bob Marston, K1TA [LONG] but please re ad all   Gilmer, Mike
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Andy Wallace
• [AMPS] ARRL and QST (and CW Relevance)   William L. Fuqua III
• [AMPS] Need Modutec Pnl Meters   Bob Dodson WB5APD EM84ak
  • [AMPS] Need Modutec Pnl Meters   Steve
  • [AMPS] Need Modutec Pnl Meters   Phil T. (VE3OZZ)
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Andy Wallace
• [AMPS] specs on 6166 tetrode   William L. Fuqua III
• [AMPS] ARRL and QST (and CW Relevance)   Michael Tope
  • [AMPS] ARRL and QST (and CW Relevance)   Bill Turner, W7TI
• [AMPS] 851/861 Triode   Steve Cook
  • [AMPS] 851/861 Triode   Arthur Moe
  • [AMPS] 851/861 Triode   Phil T. (VE3OZZ)
• [AMPS] 851/861 Triode   frank ayers jr
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code"   Paul Hicks, VE3BBH / VE3ZT
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Jon Ogden
• [AMPS] Russian tubage   tacook
• [AMPS] meter question   Arthur Moe
  • [AMPS] meter question   Joe Subich, W8IK/4
• [AMPS] Specs for 6166 tetrode needed   William L. Fuqua III
• [AMPS] meter question   Rich Measures
• [AMPS] yaesu fl2100b mod   Erol
• [AMPS] Tube   Larry L. Ravlin
• [AMPS] INFO ABOUT PNL METERS   Bob Dodson WB5APD EM84ak
• [AMPS] B&W 850 in PI-L network   William L. Fuqua III
• [AMPS] ARRL and QST (and CW Relevance)   docdc@ix.netcom.com
  • [AMPS] ARRL and QST (and CW Relevance)   Bill Turner, W7TI
• [AMPS] B&W 850 in PI-L network   Roy Koeppe
• [AMPS] ARRL and QST (and CW Relevance)   Jon Ogden
  • [AMPS] ARRL and QST (and CW Relevance)   Bill Turner, W7TI
    • [AMPS] ARRL and QST (and CW Relevance)   Andy Wallace
• [AMPS] Thanks - Alpha 89 Parts   Gary G Dein
• [AMPS] Solid State Amps   Merv Schweigert
  • [AMPS] Solid State Amps   Andy Wallace
• [AMPS] glue   Skip S Isaham
• [AMPS] ARRL and QST (and CW Relevance)   docdc@ix.netcom.com
• [AMPS] DE: K5PC   Paul Hellenberg K4JA
• [AMPS] Millen 45004 coilforms OD   Bill Murphy
• [AMPS] Autek RF1 as Dip Meter   Bill Murphy
• [AMPS] glue   km1h@juno.com
• [AMPS] turns counters   Ron Spencer
• [AMPS] ARRL and QST (and CW Relevance)   Jon Ogden
• [AMPS] glue   km1h@juno.com
• [AMPS] ARRL and QST (and CW Relevance)   Andy Wallace
• [AMPS] grid termination value and triple bypass.   Skip S Isaham
• [AMPS] My ham radio history (the early days)   km1h@juno.com
• [AMPS] Jennings variable for sale   John Cunliffe
• [AMPS] Aluminum sheet   km1h@juno.com
• [AMPS] Need Amplifier Manuals   km1h@juno.com
• [AMPS] ARRL and QST (and CW Relevance)   frank ayers jr
• [AMPS] turns counters   Ron Spencer
• [AMPS] ARRL and QST (and CW Relevance)   Jon Ogden
• [AMPS] ARRL and QST (and CW Relevance)   Jon Ogden
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   km1h@juno.com
• [AMPS] 1.75" Diameter, 1 Amp meter needed   Jon Ogden
• [AMPS] ARRL and QST   km1h@juno.com
• [AMPS] grid termination resistor value?   km1h@juno.com
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   km1h@juno.com
• [AMPS] (and CW Relevance)   km1h@juno.com
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   km1h@juno.com
  • [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Vic Rosenthal
• [AMPS] (and CW Relevance)   km1h@juno.com
  • [AMPS] (and CW Relevance)   Andy Wallace
• [AMPS] Re: Serious commentary from N4XY........................   km1h@juno.com
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   km1h@juno.com
  • [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Andy Wallace
• [AMPS] 851/861 Triode   km1h@juno.com
• [AMPS] duplicate copies of messages   Phil T. (VE3OZZ)
  • [AMPS] duplicate copies of messages   Douglas Johnson
• [AMPS] duplicate copies   Phil T. (VE3OZZ)
  • [AMPS] duplicate copies   Andy Wallace
• [AMPS] B&W 850 in PI-L network   km1h@juno.com
• [AMPS] B&W 850 in PI-L network   km1h@juno.com
• [AMPS] turns counters   km1h@juno.com
• [AMPS] D.C. Voltage Rating of A.C. Rated Capacitors   Phil Clements
• [AMPS] ARRL and QST (and CW Relevance)   km1h@juno.com
• [AMPS] ARRL and QST (and CW Relevance)   km1h@juno.com
• [AMPS] ARRL and QST (and CW Relevance)   km1h@juno.com
• [AMPS] Yaesu FL-2100 $225.00   zeitler@ibm.net
• [AMPS] RE: D.C. Rating of A.C. Rated Caps.   Phil Clements
• [AMPS] grid termination value and triple bypass.   km1h@juno.com
  • [AMPS] grid termination value and triple bypass.   Andy Wallace
• [AMPS] ARRL and QST (and CW Relevance)   km1h@juno.com
• [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   km1h@juno.com
  • [AMPS] Re: SERIOUS commentary from N4XY on "no-code" and "bounced" submission to [CW] from Bob Marston, K1TA [LONG] but please read all   Andy Wallace
• [AMPS] HV Switching Supply   km1h@juno.com
  • [AMPS] HV Switching Supply   Radio WC6W
• [AMPS] RE: Meter ?????   Arthur Moe
• [AMPS] 3CX800 in an SB-200   zeitler@ibm.net
• [AMPS] (and CW Relevance)   John Fielding
• [AMPS] DC Rating of AC Resistors   john merryman
• [AMPS] Paralell Diodes for increased current rating   john merryman
• [AMPS] 3-500Z filament voltage   Monty Taylor
  • [AMPS] 3-500Z filament voltage   Vic Rosenthal
• [AMPS] 3-500Z filament voltage   Monty Taylor
• [AMPS] Operating comments using the Emtron DX-2a   K1WPO@aol.com
  • [AMPS] Operating comments using the Emtron DX-2a   Andy Wallace
• [AMPS] 3-500Z filament voltage   km1h@juno.com
• [AMPS] Operating comments using the Emtron DX-2a   John Fielding
  • [AMPS] Operating comments using the Emtron DX-2a   henry gillow-wiles
    • [AMPS] Operating comments using the Emtron DX-2a   Jerry DiPietro
• [AMPS] grid termination value and triple bypass.   km1h@juno.com
• [AMPS] Re: paralleling power diodes   Roy Koeppe
• [AMPS] More off subject about CW   km1h@juno.com
  • [AMPS] More off subject about CW   Andy Wallace
• [AMPS] Operating comments using the Emtron DX-2a   km1h@juno.com
• [AMPS] Operating comments using the Emtron DX-2a   km1h@juno.com
• [AMPS] AM-912/TRC   Radio WC6W
• [AMPS] 3-500Z filament voltage   Rich Measures
• [AMPS] Re: paralleling power diodes   km1h@juno.com
• [AMPS] AM-912/TRC   km1h@juno.com
• [AMPS] More off subject about CW   km1h@juno.com
  • [AMPS] More off subject about CW   Andy Wallace
• [AMPS] 3-500Z filament voltage   km1h@juno.com
• [AMPS] HV Switching Supply   km1h@juno.com
• [AMPS] 3-500Z filament voltage   Roy Koeppe
• [AMPS] Operating comments using the Emtron DX-2a   K3BU@aol.com
• [AMPS] Henry 3K   Rich Measures
• [AMPS] Parallel Diodes for increased current rating   tacook
• [AMPS] Re: paralleling power diodes   Roy Koeppe

Last message date: Sun Jan 31 23:16:53 1999
Archived on: Wed Mar 6 11:25:21 2002

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...