[AMPS] L4B power supply

[Peter Chadwick]

>It may also be advantageous to shut down, and feel the caps for excessive
>heat at around the 3/4 mark.

I would make sure all the caps are discharged with a 1 Kohm 10 watt resistor
, connected on insulated  flying leads with insulated test prods across each
cap in turn for a few seconds, before poking the fingers in there. 

Yes, I'm a coward when it comes to high voltages! And when a PSU has been
hanging around for years, I don't trust the bleeder resistors either.

73

Peter G3RZP



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm