[AMPS] 3CX300A1 for AB1 GG

[ohashi]

Very quick response !!

Peter Chadwick wrote:
> If you have grid current, the tube is into AB2, and with grid
> current and a bias supply that changes voltage because it is high impedance,
> you will get very poor IMD.

You are right if no ALC is used.  My idea assumes 1-10 mA grid current
(yes, it is little bit AB2), but ALC reduces driving power from the excitor,
resulting total IMD is not so bad. Remember 6146 AB1 GC in KWM-2, same thing.


'73 de JA2DHC/1  Kazuo Ohashi
  QTH: Fujisawa, Kanagawa, Japan
   PBBS: JA2DHC@JL1ZND.11.JNET1.JPN.AS
    WebPage: http://www.ny.airnet.ne.jp/ohashi/

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm