[AMPS] FW: [Kenwood] TL-922 problem

[Brown, James E LRDOR]

I am forwarding this for Joe.

-----Original Message-----
From:	JSheinb785@aol.com <mailto:JSheinb785@aol.com>
[mailto:JSheinb785@aol.com] <mailto:[mailto:JSheinb785@aol.com]> 
Sent:	Sunday, October 03, 1999 9:02 PM
To:	kenwood@qth.net <mailto:kenwood@qth.net> 
Subject:	[Kenwood] TL-922 problem

Recently I had to replace the power switch on the amplifier and before I put
the panel back in I wanted to see if it worked properly, which it did.
However, in replacing the switch panel I accidentally shorted the 120
terminals on the switch to the chassis & blew both fuses. I replaced the
fuses (pulled the plug to the wall first!), tried to turn on the amp, but
nothing happened.  I checked the voltage at the power plug on the amp & it
read 220Volts.
Anyone have any ideas on what to look for?
Thanks and 73,
Joe, WD5FHG 
-
Your Moderator is:  Larry Wilson KE1HZ
EMail:  owner-kenwood@qth.net <mailto:owner-kenwood@qth.net> 
-----
Submissions: kenwood@qth.net <mailto:kenwood@qth.net> 

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm