[AMPS] Ameritron AL-1500

[measures]

>Hello to the group.
>
>I have an Ameritron AL-1500 serial  number 882. The tube is defective. It 
>has a date code of 9218
>
Jim --  I would like to purchase the defective tube.  My plan is to 
remove the anode cooler, photograph the part of the tube that failed and 
post the photograph on my Web site.

>I have also noticed that there is a resistor missing on the metering 
>board. The schematic calls for 2 ea. 1.5 Ohm resistors for R-3 & 4. In 
>this amp, there is only one resistor. Which is correct ? The amp with 1 
>resistor or the schematic ?
>
>Thanks and 73
>Jim W7RY
>
>


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com