[AMPS] Advice On Homebrewing Chassis Please

[Barry Kirkwood]

Out here these are known as "Hank Bushes". And they are great for panels
that need to be removed from time to time.
73
Barry Kirkwood PhD ZL1DD
Signal Hill
66 Cory Road
Palm Beach
Waiheke Island 1240
NEW ZEALAND
www.waiheke.co.nz/signal.htm
----- Original Message -----
From: Frank & Barb Ayers <w2fca@qsl.net>
To: <amps@contesting.com>
Sent: Wednesday, 27 December, 2000 11:54 AM
Subject: Re: [AMPS] Advice On Homebrewing Chassis Please


>
> I got something similar to PEM nuts from Barnhill Bolt Co. They're sorta
> like threaded pop rivets. You put them in the hole you drill, then attach
> and installation tool which is basically a grade 8 bolt through a cylinder
> and tighten. The threaded part snaps off and is drawn into itself wedging
in
> place. I've used them for years ans never had a problem. I think the brand
> is AVK.
>
> Frank
> W2FCA
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com