[AMPS] ALC 3-500z

[measures]

>
>Have AL-80 (not A or B) with single 3-500Z.  The manual indicates that it
>provides 0 - 30 negative volts for the transceiver input.  The transceiver
>is an FT-757GX which manual indicates that the ALC input voltage range
>should be between 0 - 5 neg.
>
>My concern is that I might damage the transceiver in some way if in
>adjusting the ALC I allow in significantly more than 5 neg volts.  How
>should I approach this?
>
  Even if the V and polarity are compatable, the onset delay problem can 
not be corrected until ALC is disconnected.

cheers, Luther

-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm