R: [AMPS] Watt meters and PEP

[Ian White, G3SEK]

G0MJW wrote:
>> That's a very important point. No amateur "power" meter actually
>> MEASURES RF power.
>
>Not strictly true. There are some amateur meters that measure power directly
>by absorbing it in a load. I think SSB produce one and there are several
>home made designs.
>
The test is whether the instrument can be calibrated directly from other
non-RF physical standards. If so, it's a true measurement of RF power. 

If it needs another RF wattmeter or voltmeter for calibration, then it
isn't an absolute measurement.

Many instruments use heat sensors such as thermistors/thermocouples/
bolometers to detect RF, but cannot be calibrated by non-RF means. 
On the other hand, some instruments do measure RF power by substituting
DC power, to achieve the same heating effect. I guess those count as
true measurements.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm