[AMPS] Input power question

[Mike Blier]

Do you have the auto tuners switched out in both rigs?  The Yaesu has a
higher SWR than the Icom so perhaps you have the tuner still in line.

   Mike B.

-----Original Message-----
From: Kevin Polchan <kpevin@mediaone.net>
To: amps@contesting.com <amps@contesting.com>
Date: Tuesday, January 25, 2000 7:58 AM
Subject: [AMPS] Input power question


>
>Hi All,
>
>Just a quick question after experimenting with a couple radios here the
last
>couple days.  I have an AL-800H amp (two 3cx800a7) and 2 different
exciters,
>an FT-990 and an IC-756.  I am curious why it takes 80watts from the Yaesu
>and only 55 watts from the Icom to drive to a 1500 watt carrier.  I have
put
>a wattmeter between the radio and amp and the amp and antenna.  I assume
its
>some kind of impedence thing, perhaps from the finals of the radio.  Both
>radios at 100watts out will drive the amp to the same output.
>
>I am not that concerned about it, even though the amp is rated at legal
>limit for 55W of drive, 25 watts seems like quite a large difference to
>achieve the same output.  The input SWR is < 1.5:1, but the Icom shows
>1.19:1 and the Yaesu shows 1.46:1.
>
>Any comments?
>
>Thanks and 73,
>Kevin
>KB9UPV
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampsfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm