[AMPS] henry ps problems

[nospam4me@juno.com]

"A high voltage probe on the plate voltage (3800V) revealed that
with only 100 ma of current, I had 170VAC riding on top of the
DC. "  

What does the ripple do with different values of load current..?  

Also...

It sounds similar to another problem I had with an amplifier. A 
path short allowed the T/R relay supply to enter the HV chain. 

Another Henry I repaired had a diode string which measured and 
tested fine, but failed when you pulled >.200mA current through it. 
That was the bizarre monster to find...

If you had a diagram to share, (of which I could post on sonic) 
we could offer up some better ideas. 

skipp
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com