[AMPS] Re: New G2DAF amplifier information

[Steve Thompson]

-----Original Message-----
From: measures <2@vc.net>
To: Colin Lamb <k7fm@teleport.com>; Peter Chadwick
<Peter_Chadwick@mitel.com>; amps <amps@contesting.com>
Date: 21 March 2000 20:07
Subject: Re: [AMPS] Re: New G2DAF amplifier information


snip


>for a given input signal potential, peak anode current varies according
>to the 3/2 power of relative screen potential.  When screen potential
>does not vary, the sole determiner of peak anode current is input
>potential.  Thus, linearity results.  In a linear amplifier, the sole
>determiner of peak anode current must be input  potential.  In a DAF
>amplifier the screen is busy determining peak anode current at an audio
>rate while the grid is trying to determine peak anode current at an RF
>rate.


In a true DAF circuit, isn't the screen is determining anode current at a
rate rather faster than audio?

Steve

>>
>later
>
>-  Rich..., 805.386.3734, www.vcnet.com/measures.
>end
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampsfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm