[AMPS] safety check list

[steven grant]

--- G SEVEN <superiorwavelength@prodigy.net> wrote:
> 
> Everyone should have a chronological safety check
> list committed to memory
> and posted in the shack that you can go through each
> and every time one goes
> to open up a amp to work on it. I'll start it,
> please add on.
> 
> 1. Un plug main power source
> 2. Verify HV is not present in the equipment (how?,
> shorting stick!)
> 3.Check the plate voltage meter to make sure its
discharged.
> 4.Use a high voltage probe and check again.
> 5.Use only one hand.
> 
> 
> 
> --
> FAQ on WWW:              
> http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests: 
> amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> 


__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com