[AMPS] plug needed

[Carsten Esch]

Hi,

I am looking for a plug (for 110V/220V input) for a NARDA Microline Sweeper.
Picture can be found at http://www.appello.de/plug.JPG I am looking for the
connector that should fit in the 'hole' aboove the 'RF sample plate'. Should
be abt. 26mm (1.02 in) wide and 13mm (0.51in)  high.

Thanks for your help!

73sss

Carsten, DL6LAU

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com