[AMPS] M/A Com fets ++

[alex]

For about 4 years now, we use SMPS to power our filaments :) They are under
a central Microprocessor control so we can adjust the filament (and not
only)
voltage at any time, real time, and remote if needed :) There is a
substantial saving in size, weight, and power consumption as the SMPS is
usually more efficient than a simple transformer ... However, all of this
costs extra, as you already suspect :) There is no free meal :)



Alex

----- Original Message -----
From: <jstrohm@texas.net>
To: <amps@contesting.com>
Sent: Friday, December 21, 2001 12:45 PM
Subject: RE: Re: Re: [AMPS] M/A Com fets ++

BIG Snip...

> Obligatory Amp content:
>
> I really enjoyed the idea of making toroidal filament transformers.  The
cool part is -- you can tap a toroid ANYWHERE, and move the tap lead along
the toroid to fine-tune the voltage AND any stray bias voltage that you
might be picking up anywhere.
>
> I'll be hunting for toroidal transformers for rewinding!
>
> Jim N6OTQ
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com