[AMPS] SB-220: Operate/Standby Switch
Sat, 3 Feb 2001 08:29:26 +0000
AB Electronics in South Wales UK will make and supply one to your exact
requirements - they're on the web!
In message <NEBBIILMHJHGGLCPIBHAMEIOCHAA.email@example.com>, =?iso-
8859-1?Q?Jaime_P.Ull=EDvarri?= <firstname.lastname@example.org> writes
>This is a good idea, but where to find a 100K, pull on / push off /
>potentiometer ? I have seen them in some Heathkits kits but not in Spain.
>73, Jaime EA6NB.
>*De: email@example.com [mailto:firstname.lastname@example.org]En
>*The SB220 should ALWAYS be started in the CW position to limit inrush
>*current. NEVER start the SB220 in the SSB position, as it puts too much
>*strain on components.
>*The best idea yet was to take the pot, remove it, and replace it
>*with a pull
>*on / push off / potentiometer. This will allow you to still adjust the
>*sensitivity of the meter as well as give you an operate standby
>*keep the amp looking stock.
>*Hope this helps.
>*Get your FREE download of MSN Explorer at http://explorer.msn.com
>*FAQ on WWW: http://www.contesting.com/FAQ/amps
>*Administrative requests: amps-REQUEST@contesting.com
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Administrative requests: amps-REQUEST@contesting.com
To try and not succeed is better than not to try at all (Anon)
FAQ on WWW: http://www.contesting.com/FAQ/amps
Administrative requests: amps-REQUEST@contesting.com