[AMPS] swr

[wb8jkr@juno.com]

   Carl,

  I think what you're seeing here is the poor forward-
reverse isolation of the bridge circuitry. Its simply
rearing its ugly head under higher power conditions.
 It probably gets worse as the frequency increases as
well.
  I would suggest the readings are more meaningful using
just the driver and leaving the amp off for any swr reading.

73,  Mark  WB8JKR

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com