[AMPS] National 2000

[2]

>
>
>
>>     I had this happen to me before on another amp and the AC 
>> relay contacts were stuck. Can anyone tell me if that might be 
>> the case with this amp? The plate switch no longer has a spark 
>> like it used to before the power cord was replaced. 
>
>I suspect you've answered your own question if you think about it. 
>The plate power switch is probably "welded" in on position. 
>Unplug the amplifier, discharge the capacitors and then check the 
>plate switch. 
>
//   Perhaps the NCL-2000 needs a stepstart ckt for the same reason that 
the TL-922 needs one?



-  R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com