[AMPS] coax connector ratings

[Johan Nordin]

> //  The pin spacing in an  N  and a BNC are identical.  Both breakdown at 
> c. 4000v on my hi-pot tester.  

I had quite a hard job to get the N series to survive
at 3500VDC in my HT PSU, lots of flashes, centerpins
was melt etc. Swaped to C connectors and has never
been a problems since.
Series C seems to be a great HT connector up to at least 4kV
although it has the same ratings as the N in my sheets....

73īs 
Johan/SM3UZS
> 
> >If you really want high power handling, go with a 7/16 DIN.  Overkill at HF
> >for sure though!
> 
> //  For tetrodes with handles on the 20m - 10m HF bands, quite probably 
> not.  
> 
> cheers, Jon
> 
> -  R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.  
> end
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> 


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com