[Amps] DRAKE L4B interfacing

Dr. William J. Schmidt, II bill at wjschmidt.com
Tue Jun 17 09:06:42 EDT 2003


Molex connector pins work fine... you can even cut down a female hood on a
Molex connector to work directly.  Another thing I have done... run the
conductors (insulated) into the connector and solder them on the inside...
almost made to work that way!

Sincerely,

Dr. William J. Schmidt, II  K9HZ

"Collector of Edison Wind-up Phonographs... Do you have one for me?"
Email: bill at wjschmidt.com
Alternate Email: wmschmidt at charter.net
WebPage: www.wjschmidt.com



----- Original Message ----- 
From: "Pat Barthelow" <aa6eg at hotmail.com>
To: <wjmilton at snip.net>; <amps at contesting.com>
Sent: Monday, June 16, 2003 4:27 PM
Subject: [Amps] DRAKE L4B interfacing


> That PTT connector for the L-4B is a wierd one....Perhaps some Molex pins
> will do for pin size....then perhaps an epoxied molded homebrew connector.
> The pin spacing may also correspond to one of the Molex nylon connector
> spacings....
>
> The L-4B relay needs an interface between most modern transcievers. One,
> becuz of the voltage and current required, and another because the relay
is
> quite slow making.  K6XX has a site with a speed-up circuit for the relay.
>
> Good Luck. 73 de Pat AA6EG  aa6eg at hotmail.com
>
> From: Walter Milton <wjmilton at snip.net>
> >To: amps at contesting.com
> >Subject: [Amps] DRAKE L4B
> >Date: Sat, 14 Jun 2003 11:56:16 -0400
> >
> >All,
> >
> >I have just picked up a nice (8+) L4B.  I am looking for the connectors
for
> >the VOX relay.  Does anyone know where I can find them??  Also I am
looking
> >for any hints or mods. for connecting my FT-847 to the L4B.
> >
> >Thanks in advance.
> >
> >Walt, KA2NJF
> >wjmilton at snip.net
> >
>
> _________________________________________________________________
> Add photos to your messages with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps



More information about the Amps mailing list