[Amps] Filament Inrush Control

[2]

AC relays buzz + arc their contacts in step-start service.  However when 
operated on DC of a lower potential, they work fine.  Typical DC 
potential pull-in is 20 - 30 v for a 115vac relay coil.

>  Regarding the step start.  Is there anything wrong with using a 115 vac 
>relay?
>
>Dale K9VUJ
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>


-  R. L. Measures, a.k.a. Rich..., 805.386.3734, AG6K, 
www.vcnet.com/measures.  
end