[Amps] Rm resistor

[Steve Thompson]

On Monday 13 December 2004 20:26, Luca wrote:
> Hi All
>
> For the Pi or PiL  adjustaiment whit the swr analyzer ,it's necessary to
> place  a non-inductive resistor egual to the plate impedance,from the anode
> tube and the chassis ground. I would like to know if in the PiL case ,for 
> the best result, it's necessary to place also the non-inductive resistor
> egual to RM value ,for example 300 ohm, from the load variable capacitor to
> the chassis ground.
No. The resistor from the anode to ground is the only one you need.

Steve